Faller Waveswinger (Undulation) Roundabout 140317 - Construction Log March 2007

















When the ride is "at rest" the large spring on the blue spindle is held compressed by a nylon wire attached to the smaller black wheel in the image above. To raise the seats, the tension in the spring is released by the wheel turning anticlockwise. The red/green blue/ wires form a switch which limits the extent of the rise and fall of the seats at the start and end of the ride.



















The video below shows the complete ride, which is in two halves (total duration 1min 55sec), followed by some shots from underneath the base showing the ride mechanism.

Video@YouTube


Back to Amusement Park Home Page